Electrical Panel Upgrades for Lombard Homeowners
Lombard is home to a wide mix of housing stock, from mid-century ranches near the Lilacia Park neighborhood to newer construction closer to the I-355 corridor. Many of the older homes in town were built with electrical systems that simply weren’t designed for the power demands of modern life.
Jimco Electric specializes in electrical panel upgrades for homeowners throughout Lombard and the surrounding DuPage County communities. Our licensed electricians have worked on hundreds of residential panels in this area and know exactly what local inspectors look for and what Lombard homes typically need.
What’s Included in Our Electrical Panel Upgrades Service
When you hire Jimco Electric for a panel upgrade in Lombard, you get a complete service that covers everything from initial assessment to passing the final Village of Lombard inspection. We don’t hand you a bare panel and disappear.
Full Panel Removal and Replacement
We remove your existing breaker box or fuse panel and install a new, properly sized load center rated for your home’s current and future needs. All work uses code-compliant materials and follows National Electrical Code standards as adopted by Illinois. Your new panel will be clearly labeled and organized so any future electrician can work on it safely.
Service Entrance and Grounding Updates
In many older Lombard homes, the service entrance cable and grounding electrode system also need attention during a panel upgrade. We assess both and bring them up to current code as part of the job. Proper grounding is critical for protecting your appliances and family from electrical faults.
Permit Pulling and Inspection Coordination
Jimco Electric pulls the required electrical permit through the Village of Lombard building department before any work starts. Once the installation is complete, we coordinate the scheduling of the required inspection so you don’t have to manage that process yourself. A passed inspection gives you a documented record that the work was done correctly, which matters when it comes time to sell your home.
Contact Jimco Electric today to get a straight quote on your Lombard panel upgrade with no obligation.
Signs You Need Electrical Panel Upgrades In Your Lombard Home
Lombard homeowners often put off panel upgrades until something goes wrong. Knowing the warning signs early can help you avoid a bigger problem down the road, including potential fire hazards or code violations that come up during a home sale.
Breakers That Trip Repeatedly in Older Lombard Homes
If you’re constantly resetting the same breakers, that’s a clear sign your panel can’t handle the load on that circuit. Homes in the older parts of Lombard near Main Street and Park Avenue were often wired with circuits that weren’t sized for modern appliances. Frequent tripping isn’t just an inconvenience, it’s your panel telling you it’s at capacity.
Fuse Boxes and Outdated 60-Amp or 100-Amp Service
A surprising number of homes in central Lombard still have the original fuse panels or older 60-amp service panels that were standard in the 1950s and 1960s. These systems can’t safely power a dishwasher, air conditioner, electric range, and home office at the same time. Many homeowners insurance carriers in Illinois will also flag or refuse to insure homes with fuse panels, making an upgrade a practical financial necessity as well.
Adding EV Chargers, Additions, or Major Appliances
If you’re planning to install a EV charger installation, finish a basement, or add central air conditioning to a Lombard home, your current panel may not have the capacity. A 200-amp panel upgrade gives you the headroom to add dedicated circuits without overloading your system. Planning ahead saves you from paying for two separate electrical projects within a few years of each other.
Don’t wait for a tripped breaker or a failed home inspection to address your panel. Acting early is always less expensive than dealing with a crisis.
Our Process for Electrical Panel Upgrades In Lombard Homes
Schedule Your Free Consultation
Reach out to Jimco Electric by phone or through our website to set up a time for a licensed electrician to come to your Lombard home. We work around your schedule and can typically get someone out quickly. You’ll get a clear, itemized estimate before any work is approved.
Evaluate Your Panel and Load Requirements
Our electrician will review your current panel condition, your home’s square footage, and the circuits you currently run or plan to add. We’ll check for any immediate safety concerns like double-tapped breakers, aluminum wiring, or improper grounding common in DuPage County homes from the 1970s and 1980s. From there, we’ll recommend the right panel size and configuration for your specific situation.
Complete the Panel Upgrade Installation
On installation day, we shut off the main power, remove the old panel, and install the new breaker box with all circuits properly transferred and labeled. We also add whole home surge protection if requested, which pairs well with a new panel. Most jobs are done in a single day, and your power is restored before we leave.
Pass the Final Inspection and Walk You Through the Work
After installation, the Village of Lombard sends an electrical inspector to verify the work meets code. Once it passes, we walk you through your new panel, show you which breaker controls which circuits, and answer any questions you have. You’ll have a completed permit on file and a panel that’s ready for the next several decades.
Jimco Electric also installs generator installation and ceiling fan installation services throughout Lombard and the surrounding communities. Call us today to schedule your electrical panel upgrade estimate.
