Written by Jimco Electric | Published on June 2025
To prepare your home for an electrician’s visit, clear the work area, locate your electrical panel, make a list of issues, and ensure pets and children are kept away from the work zone. These steps help the job get done faster and safer.
This guide walks you through everything you should do before a licensed electrician arrives, whether you are in Chicago or in one of the surrounding communities up to 40 miles outside the city. Following these steps can save you time and potentially reduce your labor costs.
Clear and Prepare the Work Areas Before the Electrician Arrives
One of the most helpful things you can do is clear the area where the electrician will be working. Move furniture, boxes, rugs, and other items away from outlets, switches, panels, and fixtures that need attention.
Electricians charge by the hour in most cases. Rates in the Chicago area typically run between $80 and $150 per hour depending on the complexity of the job and the contractor. Every minute spent moving your belongings is time you are paying for.
If work is being done in your basement, garage, or attic, clear a path to those areas. In many older Chicago bungalows and two-flats, basements can be cluttered storage spaces. Getting those areas accessible ahead of time makes a real difference.
- Move furniture at least 3 feet away from the work zone
- Remove rugs or floor coverings that could be a tripping hazard
- Clear shelving near electrical panels or junction boxes
- If work is in a finished wall, remove any artwork or decor nearby
- Ensure stairways and hallways leading to the work area are unobstructed
Locate Your Electrical Panel and Label the Breakers
Your electrician will almost certainly need access to your electrical panel. Before they arrive, find out exactly where it is located and make sure the area around it is clear and accessible.
Many homes in Chicago and the surrounding suburbs have panels tucked away in laundry rooms, utility closets, or unfinished basements. If you have a detached garage or coach house, there may be a secondary sub-panel there as well.
Take a few minutes to check whether your breakers are labeled. Unlabeled breakers slow down diagnostic work significantly. If you are not sure which breaker controls which circuit, Jimco Electric can help map your panel during the visit, but doing it ahead of time saves labor time.
- Open the panel door and check that all breakers are labeled
- Note any breakers that are tripped or appear damaged
- Confirm whether you have a 100-amp or 200-amp service, if you know it
- If you have a generator hookup or transfer switch, note its location
- Write down any recent power issues you have noticed, such as flickering lights or tripped breakers
Make a Detailed List of Electrical Problems or Questions
Before the electrician arrives, write down every issue you have noticed. This might seem simple, but it is easy to forget things once someone is at your door and the work is underway.
Think about outlets that stopped working, lights that flicker, switches that control nothing, or rooms where you have been running too many extension cords. These are all signals that something may need attention.
If you have been planning any upgrades, like adding a dedicated circuit for a home office, installing a ceiling fan, or adding outdoor lighting, bring that up as well. Your electrician may be able to bundle tasks and save you a return visit fee.
Jimco Electric recommends clients keep a simple notepad in the kitchen or near the breaker panel to jot down electrical issues as they happen. That way, nothing gets forgotten when the appointment day arrives.
Understand What the Electrician Will and Will Not Need From You
Homeowners sometimes hover during electrical work out of curiosity or concern. While it is fine to be available for questions, staying out of the work area is actually safer and more efficient for everyone involved.
Here is a quick comparison of helpful versus unhelpful behaviors during an electrician’s visit:
| Helpful Actions | Unhelpful Actions |
|---|---|
| Being available to answer questions about the home | Standing in the work area watching closely |
| Keeping pets and children in a separate room | Allowing pets to roam freely around tools and wires |
| Having your list of issues ready to share | Waiting until mid-job to mention additional problems |
| Knowing where your panel and sub-panels are located | Leaving the electrician to search the home alone |
| Asking questions at a natural stopping point | Interrupting frequently during active work |
The electrician will handle everything technical. Your job is to make the environment safe and accessible so they can focus on the work.
Know the Permit Requirements for Electrical Work in Chicago and Surrounding Areas
Many electrical projects in Chicago and Cook County require a permit from the city or municipality. This includes panel upgrades, new circuit installation, EV charger installation, and significant rewiring projects.
The City of Chicago requires permits for most electrical work beyond simple fixture replacements. Suburban municipalities like Naperville, Aurora, Joliet, and Elgin each have their own permitting departments with slightly different requirements.
Here is a general breakdown of common electrical projects and their permit status in the Chicago area:
| Project Type | Permit Typically Required? | Estimated Permit Cost |
|---|---|---|
| Panel upgrade (100A to 200A) | Yes | $75 to $200 |
| New circuit installation | Yes | $50 to $150 |
| EV charger installation | Yes | $50 to $150 |
| Outlet or switch replacement | Usually No | N/A |
| Ceiling fan installation | Usually No | N/A |
| Whole-home rewire | Yes | $200 or more |
A licensed electrician like those at Jimco Electric will pull the required permits on your behalf. You do not need to handle this yourself, but knowing whether a permit is needed helps you understand the full project timeline.
Prepare Pets, Children, and Household Members for the Visit
Electrical work involves live wires, tools, open walls, and power outages in parts of the home. This is not a safe environment for curious kids or pets.
Plan to have children occupied in a room away from the work area. If you have a dog that gets excited around strangers, consider kenneling them or having them stay in a quiet room with the door closed. This protects the animal and keeps the electrician focused.
Also let other household members know that certain parts of the home may lose power during the visit. If someone works from home, they should be ready with a laptop backup or plan to work from another location for part of the day.
- Secure pets in a separate room or crate during the visit
- Keep children out of the work zone and explain that tools and wires are off-limits
- Warn family members that power may be cut to parts of the home
- Charge laptops and devices the night before in case power is needed
- Have a flashlight available if the panel will be shut down during work
Gather Any Relevant Information About Your Home’s Electrical History
If you have paperwork from a previous electrical inspection, a home inspection report, or receipts from past electrical work, pull those out before the visit. This background information helps your electrician understand what has already been done and what might still need attention.
Older homes in Chicago’s neighborhoods, including Bridgeport, Pilsen, Logan Square, and similar areas, often have a mix of old and updated wiring. Knob-and-tube wiring from the early 1900s is still found in some properties. Knowing that history upfront helps the electrician plan their approach.
If your home was built before 1980, it may also have aluminum wiring in some circuits. This is worth mentioning to your electrician, as aluminum wiring requires specific connectors and inspection steps.
- Locate any electrical permits or inspection records from past work
- Note the age of your home if you know it
- Share any known issues discovered in a home inspection report
- Mention if previous owners did any DIY electrical work
- Point out any areas of the home that have been renovated
FAQs on Preparing Your Home for an Electrician’s Visit
Do I need to be home the entire time the electrician is working?
Yes, it is generally a good idea to stay home during the visit. The electrician may need to ask questions about your preferences, locate specific areas, or get your approval before making certain decisions. Being available prevents delays and ensures the job matches what you expected.
Should I turn off the power before the electrician arrives?
No, do not turn off the power ahead of time unless specifically instructed by your electrician. They need to assess live circuits to diagnose problems accurately. Your electrician will manage the panel and breakers themselves as part of the job.
How long does a typical electrician visit take in Chicago?
It depends on the scope of work. A simple outlet repair or fixture replacement might take 30 to 60 minutes. A panel upgrade or new circuit installation can take 4 to 8 hours or more. Your electrician should give you a time estimate when you book the appointment.
Will the electrician need to cut into my walls?
Some projects do require cutting drywall to access wiring, especially when running new circuits or replacing old wiring. A good electrician will always tell you before making any cuts and will try to minimize damage. Patch and paint work is typically done separately by a drywall contractor.
What should I do if I smell burning or see sparks before the electrician arrives?
If you smell burning wires or see sparks, turn off the breaker for that area immediately and call your electrician right away. Do not use that circuit until it has been inspected. In cases of smoke or visible fire, evacuate and call 911 first.
Is it rude to ask the electrician for an itemized estimate before they start?
Not at all. Asking for a written estimate before work begins is completely reasonable and professional contractors expect it. A clear estimate protects both you and the electrician and helps avoid misunderstandings about the final cost.
Wrap Up and Next Steps
Preparing your home for an electrician’s visit is straightforward when you know what to focus on. Clear the work areas, locate your panel, list your issues, manage pets and family members, and gather any relevant paperwork you have on hand.
These small steps make a big difference in how smoothly the job goes and how much time you spend paying for labor. A well-prepared home means a faster, safer, and more effective visit.
If you are in Chicago or anywhere up to 40 miles outside the city, Jimco Electric is ready to help. Call us at 708-304-8687 to schedule your appointment or ask any questions before we arrive.