Hardwired vs Plug-In Level 2 EV Charger: Which Is Better?

Electrician checking an electric vehicle connected to an outdoor home EV charging station in a residential driveway.

Hardwired Level 2 EV chargers are generally the better long-term choice, offering faster charging speeds and a cleaner installation than plug-in models. This guide breaks down the key differences, costs, and local considerations for Chicago-area homeowners. Jimco Electric helps you choose and install the right setup for your home.

How Far Should a Standby Generator Be From Windows and Doors?

Technician inspecting an outdoor standby generator with its cover open beside a residential home.

A standby generator must be placed at least 5 feet from windows, doors, and openings, though many local codes require 18 inches to 5 feet minimum clearance depending on the unit size and fuel type. This guide covers placement rules, Chicago-area code requirements, ventilation concerns, and what to expect when hiring a licensed electrician. Getting the distance right protects your family from carbon monoxide and keeps your installation up to code.

How Do You Keep a Sump Pump Running During a Power Outage?

Electrician standing inside a dark kitchen during a nighttime power outage with a battery-powered lantern illuminating the table.

A sump pump backup system is the only reliable way to keep your basement dry when the power goes out. From battery backups to generator hookups, Chicago homeowners have several options depending on their budget and basement risk. This guide covers everything you need to know to stay protected.

Does a Whole-Home Battery Backup Need a Panel Upgrade?

Electrician inspecting an outdoor electrical control panel beside a residential swimming pool and pool equipment.

Many Chicago homeowners assume a whole-home battery backup automatically requires a panel upgrade, but that is not always the case. Whether you need one depends on your current panel capacity, the battery system size, and local code requirements. This post breaks down what to expect so you can plan and budget with confidence.

Do You Need to Update Old Wiring to Get Homeowners Insurance?

Electrician inspecting exposed electrical wiring along wooden ceiling beams in an older home.

Many insurance companies will refuse to cover homes with outdated wiring, or will charge significantly higher premiums until the wiring is replaced. If you own an older home in Chicago or the surrounding suburbs, understanding what insurers look for can save you money and stress. This guide walks you through exactly what you need to know.

Do You Need a Permit to Install a Standby Generator in Illinois?

Technician inspecting an outdoor standby generator with its cover open beside a residential home.

Yes, you need a permit to install a standby generator in Illinois, and skipping this step can lead to fines, failed inspections, or voided insurance. This guide covers what permits are required, who pulls them, and what the process looks like in Chicago and surrounding communities up to 40 miles out.

Can You Pull Your Own Electric Meter to Work on the Panel in Illinois?

Electrician working on an exterior electrical meter box mounted on a brick wall.

In Illinois, homeowners cannot legally pull their own electric meter to work on a panel. The utility company owns the meter, and removing it without authorization can result in fines, service termination, and serious safety hazards. This article explains what Chicago-area homeowners need to know before starting any panel work.

Can a Tripped GFCI Outlet Cut Power to Other Outlets?

White GFCI electrical outlet installed on a tiled kitchen backsplash above a countertop.

Yes, a tripped GFCI outlet can absolutely cut power to other outlets in your home. This happens because GFCI outlets are often wired in series, protecting multiple downstream receptacles. This guide explains how that works, how to find the right GFCI, and when to call a licensed electrician in Chicago.

Do Roof Heat Cables Need a Dedicated GFCI Circuit?

Electrician adjusting a wall-mounted thermostat above an electric baseboard heater inside a residential home.

Roof heat cables must be connected to a GFCI-protected circuit, and in most cases a dedicated circuit is strongly recommended. This article explains the electrical requirements, Chicago-area code considerations, and what a proper installation looks like. If you’re preparing for winter in the Chicago area, this guide will help you stay safe and compliant.